CAT IV MIT400/2 Insulation Testers

All about product
Specification
Reviews
0
Questions
0
In Stock
Product Code: MIT400/2
Brand: Megger
Reviews: 0
Found cheaper?
0.00₴
Ex Tax: 0.00₴
DataSheet
Buy in 1 click:
Specifications: (See all)
Storage temperature
-25 to +70 °C
Аccuracy
BS EN 61557-2 (2007) 50V, ±2.0% ±2d, 100kΩ - 900kΩ ± 10.5% 100 V, ±2.0% ±2d, 100kΩ - 900kΩ ± 10.3% 250V, ±2.0% ±2d, 100kΩ - 900kΩ ± 10.3% 500V, ±2.0% ±2d, 100kΩ - 900kΩ ± 10.3% 1000V, ±2.0% ±2d, 100kΩ - 900kΩ ± 11.5%
Operating temperature
-10 to +55 °C
Display
Analog: 1 GW full scale Resolution 0.1 kΩ
Temperature coefficient
<0.1% per °C up to 1 GΩ <0.1% per °C per GΩ above 1 GΩ
Description

The MIT400/ 2 series are insulation and metal bond testers designed for electrical and industrial testing. In addition, they have an exceptionally wide range of applications in electrical installations, cable testing, motor testing, automotive, building wiring, aircraft equipment, maintenance, etc. The accuracy of the insulation test voltage display has been improved with feedback controlled test voltages to limit overvoltage to 2% rather than the 10-20% that other instruments have. A variable range has been added to allow the use of any intermediate test voltage from 10 V to 1000 V in 1 V steps where a special test voltage is required which is not available in the standard ranges. Metal bond testing is now significantly faster, and a single 0.01 Ω to 1.0 MΩ autorange function replaces the "Ohm" and "KOhms" ranges. Test current can be selected 200mA and 20mA. New devices replace the old MIT400 series, have a redesigned case, a new more stable stand, a 6-cell battery compartment, fuses have been moved under a separate cover. Enclosures have been redesigned to increase protection and achieve IP54 weatherproofing.

Peculiarities • Designed for electrical and industrial testing • Insulation testing up to 1000 V and 200 GΩ • Stabilized insulation testing voltage (New) • Fast metal bond testing from 0.01 Ω to 1 MΩ on a single range (New) • Adjustable insulation test voltage from 10 V to 1000 V (New) • Measurement of AC and DC voltage 600 V TRMS • Save test results and Bluetooth® download • Voltage detection and short circuit protection • Possibility of power supply from current accumulators and charging from car or mains (New) • CAT IV 600 V & IP54

The range is represented by 4 devices: MIT400/2: 250V, 500V and 1000V MIT410/2: 50V, 100V, 250V, 500V and 1000V + DAR, PI MIT420/2: 50V, 100V, 250V, 500V and 1000V + DAR, PI + selectable voltage with 1V resolution (New) and storage of results MIT430/2: 50V, 100V, 250V, 500V and 1000V+PI+ DAR + selectable voltage with 1 V resolution (New) + Bluetooth


Specifications
Main characteristics
Аccuracy
BS EN 61557-2 (2007) 50V, ±2.0% ±2d, 100kΩ - 900kΩ ± 10.5% 100 V, ±2.0% ±2d, 100kΩ - 900kΩ ± 10.3% 250V, ±2.0% ±2d, 100kΩ - 900kΩ ± 10.3% 500V, ±2.0% ±2d, 100kΩ - 900kΩ ± 10.3% 1000V, ±2.0% ±2d, 100kΩ - 900kΩ ± 11.5%
Technical data
Storage temperature
-25 to +70 °C
Operating temperature
-10 to +55 °C
Display
Analog: 1 GW full scale Resolution 0.1 kΩ
Temperature coefficient
<0.1% per °C up to 1 GΩ <0.1% per °C per GΩ above 1 GΩ
Weight
600g (MIT400), (28.74oz) 815 g (MIT2500) (27.22 oz) Weight (tool and box) 1.75 kg (3.86 lb)
Protection class
The tool complies with EN 61010-1 (1995) up to phase voltage 600 V, category IV. See what's included safety warning. EMC According to IEC 61326 including amendment #1
Battery life
3000 Wiring Tests with Duty Cycle: 5 Seconds ON / 55 seconds OFF
Dimensions
228mm x 108mm x 63mm (9.00" x 4.25" x 2.32")
Power supply
6 x 1.5 V batteries, type IEC LR6 (AA, MN1500, HP7, AM3 R6HP) Alkaline Rechargeable NiMH batteries can be used.
Reviews
0 / 5
average product rating
0
0
0
0
0

There are no reviews for this product, be the first to leave your review.

Answers & questions

No questions about this product, be the first and ask your question.

CAT IV MIT400/2 Insulation Testers
0.00₴
Модули для Opencart