Microohmmeter Megger DLRO 10, DLRO 10x

Megger DLRO 10, DLRO 10x are a family of microohmmeters that can measure low resistances in the range of 0.1 nњ to 2 k њ. Both instruments provide a maximum current of 10A DC, which is automatically selected by the instrument depending on the value of the measured resistance. The Megger DLRO 10x microohmmeter allows the user to exit the automatic current selection mode and select the required current independently. The measured resistance value is shown on the display of the device with the designation of the range nњ, mњ or њ. The DLRO10 has a large seven-segment display and indicators, while the DLRO10X displays all information on a backlit LCD. The Megger DLRO 10x microohmmeter allows you to transfer measured values ​​to a computer in real time and / or save them in the instrument's memory.

Both instruments have a very strong, but at the same time extremely light body, for use on site or in the laboratory. The device is quite light and small, which allows testing in places where it was out of the question before. The Megger DLRO 10 microohmmeter has a large, bright 4 ½ LED display, while the DLRO 10X comes with a huge backlit LCD display.

For complete user safety during the test, both instruments are supplied with a set of duplex (double) wires, each 1.2 meters long. One of the wires is equipped with an LED that duplicates the device indicator that all 4 test contacts well made, the presence of high voltage, as well as the presence of a discharge current on the sample after testing. You can also order a huge number of optional wires with pins, alligator clips or Kelvin clips with the instrument. The device is powered by built-in NiMH batteries, which allow you to conduct at least one thousand 10A tests on a single charge. The battery has built-in electronic circuitry that prevents damage to the battery due to overcharging and a charge indicator. The batteries can be charged both from the 220V network and using the 12V car adapter supplied with the device. The battery has its own charge indicator, which will allow you to control its charge even without connecting the device. The Megger DLRO 10x microohmmeter allows you to read test results in real time via the RS 232 port for printing directly on a printer or for saving to a computer. Internal memory for 700 measurement results along with explanations entered from the keyboard.