All about product
Specification
Reviews0
Questions0
In Stock
Product Code: TDR1000/3
Brand: Megger
Reviews:
0
Found cheaper?
0.00₴
Ex Tax:
0.00₴
Buy in 1 click:
Specifications:
(See all)
Automatic shutdown
Automatic after 5 minutes of inactivity
Battery
Six LR6 (AA), permanganate, nickel-cadmium, or nickel-metal hydride batteries
Peculiarities
When using optional fused probes, this instrument complies with IEC61010-1 for connection to 300 V circuits
between terminals and up to 150 V CAT IV to ground
EMC Complies with the EMC requirements of BS EN 61326-1 (light industry), minimum rating for class A for all immunity tests.
Sustainability Table 2: Industrial
Storage temperature
-20 ºC to +70 ºC
Measuring range
10m, 25m, 100m, 250m, 1000m,
2500 m, 5000 m
The TDR1000/3 is a handheld, compact OTDR for troubleshooting metal cables. It has a minimum resolution of 0.1 m and a maximum range of 5 km depending on the selected velocity factor and cable type.
Four output resistances are available (25, 50, 75 and 100 ohms) and a velocity factor between 0.2 and 0.99 to meet any requirement for testing metallic cables.
The TDR1000 has a simple selection option which, together with a 4 position control switch, allows for intuitive control of the instrument.
Functions
Automatic shutdown
Automatic after 5 minutes of inactivity
Technical data
Storage temperature
-20 ºC to +70 ºC
Measuring range
10m, 25m, 100m, 250m, 1000m,
2500 m, 5000 m
Accuracy
± 1% of range ± pixel in 0.67 VF *Note- Measurement accuracy for the specified cursor position and correctly selected velocity factor]
Permission
1% of range
Connectors
Two 4 mm safety terminals
Gain
User selectable for each range in 3 steps (in manual mode)
Operating temperature
From 15 ºC to +50 ºC
Display
256 x 128 pixels LCD
Backlight
Lasts 1 minute after activation
Weight
0.6 kg (1.32 lb)
Housing
ABS
Battery life
up to 14 hours (typical)
Dimensions
230 mm (9 inches) x 115 mm (4.5
inch) x 48 mm (2 inches)
Additional features
Peculiarities
When using optional fused probes, this instrument complies with IEC61010-1 for connection to 300 V circuits
between terminals and up to 150 V CAT IV to ground
EMC Complies with the EMC requirements of BS EN 61326-1 (light industry), minimum rating for class A for all immunity tests.
Sustainability Table 2: Industrial
Power supply
Battery
Six LR6 (AA), permanganate, nickel-cadmium, or nickel-metal hydride batteries
There are no reviews for this product, be the first to leave your review.
No questions about this product, be the first and ask your question.
Reflectometer TDR1000/3
0.00₴